VALID BRAINDUMPS NSE7_EFW-7.2 FREE, DUMP NSE7_EFW-7.2 CHECK

Valid Braindumps NSE7_EFW-7.2 Free, Dump NSE7_EFW-7.2 Check

Valid Braindumps NSE7_EFW-7.2 Free, Dump NSE7_EFW-7.2 Check

Blog Article

Tags: Valid Braindumps NSE7_EFW-7.2 Free, Dump NSE7_EFW-7.2 Check, Braindump NSE7_EFW-7.2 Pdf, NSE7_EFW-7.2 Valid Exam Pattern, Exam NSE7_EFW-7.2 Objectives

In today’s global market, tens of thousands of companies and business people are involved in this line of NSE7_EFW-7.2 exam. It is of utmost importance to inquire into the status of exam candidates’ wills to figure out what are the NSE7_EFW-7.2 practice materials you really needed. According to your requirements we made our NSE7_EFW-7.2 Study Materials for your information, and for our pass rate of the NSE7_EFW-7.2 exam questions is high as 98% to 100%, we can claim that you will pass the exam for sure.

Fortinet NSE7_EFW-7.2 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Routing: It covers implementing OSPF to route enterprise traffic and Border Gateway Protocol (BGP) to route enterprise traffic.
Topic 2
  • VPN: Implementing IPsec VPN IKE version 2 is discussed in this topic. Additionally, it delves into implementing auto-discovery VPN (ADVPN) to enable on-demand VPN tunnels between sites.
Topic 3
  • Central management: The topic of Central management covers implementing central management.
Topic 4
  • Security profiles: Using FortiManager as a local FortiGuard server is discussed in this topic. Moreover, it delves into configuring web filtering, application control, and the intrusion prevention system (IPS) in an enterprise network.
Topic 5
  • System configuration: This topic discusses Fortinet Security Fabric and hardware acceleration. Furthermore, it delves into configuring various operation modes for an HA cluster.

>> Valid Braindumps NSE7_EFW-7.2 Free <<

Get Help from Real ExamDumpsVCE Fortinet NSE7_EFW-7.2 Exam Questions

We ensure you that if you can’t pass the exam just one time by using NSE7_EFW-7.2 training materials of us, and we will give you full refund. And the money will be returned to your payment account. In addition, NSE7_EFW-7.2 exam braibdumps are high-quality and accuracy, and they can help you pass the exam successfully. In order to build up your confidence for NSE7_EFW-7.2 Exam Materials, we are pass guarantee and money back guarantee, so you don’t need to worry you will waste your money. We offer you free update for one year foe NSE7_EFW-7.2 training materials, and our system will send update version to your email automatically.

Fortinet NSE 7 - Enterprise Firewall 7.2 Sample Questions (Q12-Q17):

NEW QUESTION # 12
Which ADVPN configuration must be configured using a script on fortiManager, when using VPN Manager to manage fortiGate VPN tunnels?

  • A. Configure IP addresses on IPsec virtual interlaces
  • B. Enable AD-VPN in IPsec phase 1
  • C. Disable add-route on hub
  • D. Set protected network to all

Answer: B

Explanation:
To enable AD-VPN, you need to edit an SD-WAN overlay template and enable the Auto- Discovery VPN toggle. This will automatically add the required settings to the IPsec template and the BGP template. You cannot enable AD-VPN directly in the IPsec phase 1 settings using VPN Manager.


NEW QUESTION # 13
Exhibit.

Refer to the exhibit, which contains a partial VPN configuration.
What can you conclude from this configuration1?

  • A. FortiGate creates separate virtual interfaces for each dial up client.
  • B. Dead peer detection s disabled.
  • C. The VPN should use the dynamic routing protocol to exchange routing information Through the tunnels.
  • D. The routing table shows a single IPSec virtual interface.

Answer: D

Explanation:
The configuration line "set dpd on-idle" indicates that dead peer detection (DPD) is set to trigger only when the tunnel is idle, not actively disabled1. References: FortiGate IPSec VPN User Guide - Fortinet Document Library From the given VPN configuration, dead peer detection (DPD) is set to 'on-idle', indicating that DPD is enabled and will be used to detect if the other end of the VPN tunnel is still alive when no traffic is detected.
Hence, option C is incorrect. The configuration shows the tunnel set to type 'dynamic', which does not create separate virtual interfaces for each dial-up client (A), and it is not specified that dynamic routing will be used (B). Since this is a phase 1 configuration snippet, the routing table aspect (D) cannot be concluded from this alone.


NEW QUESTION # 14
You want to improve reliability over a lossy IPSec tunnel.
Which combination of IPSec phase 1 parameters should you configure?

  • A. fragmentation and fragmentation-mtu
  • B. fec-ingress and fec-egress
  • C. keepalive and keylive
  • D. Odpd and dpd-retryinterval

Answer: A

Explanation:
For improving reliability over a lossy IPSec tunnel, the fragmentation and fragmentation-mtu parameters should be configured. In scenarios where there might be issues with packet size or an unreliable network, setting the IPsec phase 1 to allow for fragmentation will enable large packets to be broken down, preventing them from being dropped due to size or poor network quality. The fragmentation-mtu specifies the size of the fragments. This is aligned with Fortinet's recommendations for handling IPsec VPN over networks with potential packet loss or size limitations.


NEW QUESTION # 15
Refer to the exhibit, which shows a routing table.

What two options can you configure in OSPF to block the advertisement of the 10.1.10.0 prefix? (Choose two.)

  • A. Configure a route-map out
  • B. Configure a distribute-list-out
  • C. Remove the 16.1.10.C prefix from the OSPF network
  • D. Disable Redistribute Connected

Answer: A,B

Explanation:
To block the advertisement of the 10.1.10.0 prefix in OSPF, you can configure a distribute-list-out or a route- map out. A distribute-list-out is used to filter outgoing routing updates from being advertised to OSPF neighbors1. A route-map out can also be used for filtering and is applied to outbound routing updates2. References := Technical Tip: Inbound route filtering in OSPF usi ... - Fortinet Community, OSPF | FortiGate / FortiOS 7.2.2 - Fortinet Documentation


NEW QUESTION # 16
Exhibit.

Refer to the exhibit, which contains a CLI script configuration on FortiManager.
An administrator configured the CLI script on FortiManager Which statement is true based on the script configuration?

  • A. The script successfully added a static route with gateway 10.20.121.2 on the manages device
  • B. The CLI scripts failed to execute because of an incomplete command
  • C. CLI scripts must start with # l.
  • D. The commands are missing d3_cmd at beginning

Answer: B


NEW QUESTION # 17
......

If you want to pass the exam quickly, NSE7_EFW-7.2 prep guide is your best choice. We know that many users do not have a large amount of time to learn. In response to this, we have scientifically set the content of the data. You can use your piecemeal time to learn, and every minute will have a good effect. In order for you to really absorb the content of NSE7_EFW-7.2 Exam Questions, we will tailor a learning plan for you. This study plan may also have a great impact on your work and life. As long as you carefully study the NSE7_EFW-7.2 study guide for twenty to thirty hours, you can go to the NSE7_EFW-7.2 exam.

Dump NSE7_EFW-7.2 Check: https://www.examdumpsvce.com/NSE7_EFW-7.2-valid-exam-dumps.html

Report this page